Archive

Archive for the ‘Asus Eee PC 1000H’ Category

Asus EEEPC 1000H Bios Update

February 22nd, 2010 3 comments

Asus EEEPc 1000H zizzibaddi.comInternet rumors go around Windows 7 on EEEPc so we have done that and one task is to update the bios with the 2204 version 26/10/2009.

We have used a USB SD Card Reader and a 512Megabyte MMC Card with its SD adapter but in general every old SD (FAT16) should be ok

Here are the steps:

1) Download the bios from EEEPc Asus Site and unzip it. The file will look like 1000H-ASUS-2204.ROM but you have to rename it to 1000H.rom to be able to use it

2) Insert your USB Pen Drive or USB Card Reader and format it as FAT16 then copy the file 1000H.rom onto it

3) Make sure your 1000H is powered off, no USB Device is plugged, it is running on power supply and the battery is fully charged. Insert the USB Pen Drive or USB Card Reader with the bios on it and boot the machine.

4) During POST press ALT+F2 and the Bios Update Utility will start looking for USB Device, it will find yours and will start reading the 1000H.rom file, once done it will delete the current bios and then will replace it with the new one. At the end the procedure will ask you to power the machine off, remove the USB and restart it

5) When you boot it the new bios configuration utility will show up for you to configure some stuff just like boot order priority etc, just do what you need and save it

6) Congratulations! You now have your bios updated and you may proceed to install Windows 7 Ultimate

Asus EEEPC 1000H Bios Update

Share 3G Internet USB on WinXPP via WiFi to iPhone

October 26th, 2009 10 comments

Hello people, ZizziBaddi staff is travelling and we have been given some USB 3g Internet Keys for our Asus Eee PC 1000H so since we are always geeking around we challenged ourselves to share our 3G Internet connection via USB Key by Momo Design to our iPhones and here goes the tutorial.

Requirements:

– Computer with Windows XP SP2, we have used the Asus EEE PC 1000H

– USB 3G Internet Key, we have used the 3 Momo Design 7,2Megabit

– 3G Internet Account attached to our SIM Card, much better a flat rate with no limited traffic

Step by Step

1- Connect the USB, get it recognized and install its drivers and application. We won’t cover here how to set it up but do it before following this tutorial

2- Start/Settings/Network Connection. Among the Dial Up connections you will find the profile used by the USB Key, right click on it, choose properties and then the Advanced label:

On Windows Firewall – Click on Setting, then set it OFF to disable it
On Internet Connection Sharing – Enable it by ticking the box
On Home Networking Connection choose the WLAN adapte
r

3- On the same window, below the Dial Ups you will see LAN or High Speed Internet, locate your WLAN, right click on it, select properties and on “This connection uses the following items” locate the last one “Internet Protocol (TPC/IP), select it and click properties.

4- Click on “Use the following IP Address” and configure it as follows:

IP Address 192.168.1.1
Subnet Mask 255.255.255.0
Default Gateway 192.168.1.1
Use the followding DNS Server
Preferred DNS Server 192.168.1.1

4- Click now on Wireless Networks and on Preferred Networks click on Add and configure it as follows:

Network Name SSSID zizzibaddi3g
Tick the box to Enable even if this network is not broadcasting
On Wireless Network Key
Network Authentication Open
Data Encryption Disable (You can enable it later)
Tick to enable This is a Computer-to-Computer (Ad Hoc) network. Wireless Access points are not used

5- On iPhone (or any other WiFi device) tap Settings then Wi-Fi and enable it

6- On Computer, right click on WLAN icon on the tray area, next to the clock and click on View Available Wireless Networks. The new zizzibaddi3g will be listed, select it and click Connect.

7- On iPhone the new WLAN will be listed as zizzibaddi3g, tap it to connect to it, then tap the > arrow to configure it as follows:

IP Address Static
IP Address 192.168.1.2
Subnet Mask 255.255 seroquel pill.255.0
Router 192.168.1.1
DNS 192.168.1.1

8- The WLAN on computer should say Connected and the iPhone should connect as well.

9- Close “Settings” on iPhone and launch Safari or any other Internet Application and there you go online with your 3g Internet USB Connection!

If you like this tutorial feel free to share it, delicious it, email it, subscribe via your favourite RS Reader or by email with a simple comment.

hal.dll missing or corrupt on Eee PC – How to Fix it

May 16th, 2009 No comments

This method requires 2 Windows Instances, for example on C drive and D drive but it might be hacked as you wish to fit your needs.

I have explained a trick and the reason for hal.dll issue on this article

http://www.zizzibaddi.com/blog/restore-xp-on-eee-1000h-from-sd-usb-with-acronis-rescue-tutorial